Automation

 View Only
last person joined: 2 days ago 

Ask questions and share experiences about Apstra, Paragon, and all things network automation.

1 to 50 of 278 threads (1.2K total posts)
  Thread Subject Replies Last Post Status
Script failing to pull interface details via RPC for IRB interfaces on Juniper QFX
0 2 days ago by RoninDN
scripting request system storage cleanup
2 13 days ago by MARK JOHNS
Automation to pull interface and Interface description to CSV
0 16 days ago by BRADLEY RADOMSKI
RPC-Reply Yang
0 17 days ago by Mariusz Daroch
apstra api inspector
0 19 days ago by Maurizio Del Vecchio
Question on SALT files
1 28 days ago by STUART RIDSDALE
Original post by djadhav
Senior Network Engineer opportunity at Ohio State!
0 one month ago by RYAN HOLLAND
Compile commands in a single script to extract monitoring (status) output
1 one month ago by spuluka
Original post by LEANGF.LEANGF
ssh connection permission denied
3 one month ago by Ramon Martinez Garcia
Original post by NICO BOCCIA
Question on Paragon Active Assurance
1 one month ago by PETER TAVENIER
Original post by djadhav
Ansible error when attempting to Connect to Junos Device using juniper.device.pyez
1 one month ago by MICHAEL GARIPPO
Original post by Jeremie Rouzet
SNMP oid for subscriber session ID
0 one month ago by ZURA SHAISHMELASHVILI
Commit synchronize option in Ansible
0 2 months ago by Anonymous
commit sync using ansible
0 2 months ago by Anonymous
simple rescue slax script
9 2 months ago by MILAN MARKOVIC
Original post by MARK JOHNS
Pyez and Ansible error with Junos: 20.4R3.8
4 2 months ago by tayzar
creating a definition for reports
0 2 months ago by MARK JOHNS
How can we improve the Juniper Elevate Community?
1 3 months ago by Jodi Meier
Question on the JET API
3 3 months ago by ANDREY LEO
Original post by djadhav
PyEz ConnectAuthError
1 3 months ago by djadhav
Original post by josephtillman11
EVO Pyez
0 4 months ago by Harshita Kapadia
How to Automatically Update Prefix Lists - Script fails
2 4 months ago by Dragan Jovicic
RPKI session monitor with event-options
2 4 months ago by FRANK FILIPPIDIS
netconf rpc request in secondary node ?
2 5 months ago by JOSE IBANEZ VELA
dev.facts long delay about 10 minutes
0 5 months ago by JOSE IBANEZ VELA
Ansible for Configuration
3 6 months ago by cdjny
Question on JSNAPy --check
0 6 months ago by djadhav
Question on cAdvisor graph
0 6 months ago by djadhav
Question on remotely running SLAX op script.
1 7 months ago by Daniel Jones
Original post by djadhav
scp.SCPException: error: command is not valid on the ex3400-48p
0 7 months ago by LYDIA
Question on XSD file location
1 8 months ago by cdot65
Original post by djadhav
JET API Documentation
1 8 months ago by cdot65
Original post by djadhav
PyEZ and VSCode - Could not resolved Pylance (ReportMissingImports)
2 8 months ago by cdot65
Original post by ArslanNawaz2020
Netconf RPC reply format
2 8 months ago by cdot65
Original post by ISA GOK
Question on Loading a Jinja Template 1 9 months ago by asharp
Original post by djadhav
Ansible playbook for config generation
1 9 months ago by asharp
Original post by DAN RAWLINGS
PYEZ subsystem not found
3 9 months ago by cdot65
Original post by Anonymous
Junos Config Syntax Highlighting for Sublime Text
4 9 months ago by ARENTAS BUTKUS
Original post by Erdem
Automatic TASK
1 9 months ago by kronicklez
Original post by Alberto Guerrero
JTAF / Terraform
0 9 months ago by CHRIS RUSSELL
Execute Slax Scripts in Junos Space? Space Version 21.2R1
2 10 months ago by greg1991
ZTP with SRX Device v15.1X49-D75.5 and ISC v4.4.1
1 10 months ago by Jeremie Rouzet
ZTP for Juniper SRX Devices for initial setup
1 10 months ago by Jeremie Rouzet
Original post by Webernessi
Ad-hoc command suboptions via cli
3 11 months ago by RyRy_G
Paragon Install - Kubernetes HTTP(S) Proxy
1 one year ago by MARTIN ZIEGLER
Configure SRX-12.3X48-D70.3 using NETCONF
0 one year ago by DIKOUE
Junos PyEZ (set command & edit mode)
0 one year ago by Benjamin.cl
off-box pythong load configuration from https server
1 one year ago by gongyayu
off-box python load configuration error
1 one year ago by gongyayu
How to search an existing event for an event policy?
2 one year ago by gongyayu