Yes , i have built with vJunos as mentioned below. Let me know which information you want to see . if possible for you.
Original Message:
Sent: 04-29-2024 16:13
From: cdoyle
Subject: Juniper Apstra
Did you rebuild the lab with vJunos instead of vQFX? I can't tell based on the screenshots.
------------------------------
Colin Doyle
Lead BizDev Manager - Security Strategy
Juniper Networks
https://www.youtube.com/@5minutejunos
Original Message:
Sent: 04-28-2024 07:03
From: Uni1389
Subject: Juniper Apstra
Hello Colin,
Thanks for your feedback. Now i have moved to next step, but got again some errors as mentioned below, thanks again for further assistance:-
------------------------------
[uni1389]
Original Message:
Sent: 04-05-2024 15:49
From: cdoyle
Subject: Juniper Apstra
Ah, ok. I see the problem, here.
You are using vQFX. Outright, mac-vrf isn't supported on vQFX (any version), so in video 5 (Provisioning Services) when I'm walking through the creation of a new routing zone (~2:40), I select Symmetric IRB. Symmetric IRB requires mac-vrf.
Here's the thing... I don't know if recreating the routing zone with asymmetric IRB is going to fix your problem. Apstra 4.2.1 defaults to using mac-vrf during blueprint creation according to the release docs, allowing the admin to opt-in for any existing blueprints. That is to say that whether you configure for symmetric or asymmetric irb in your routing zone may not matter since we're creating a new blueprint. Give it a try, but if that doesn't work, I think you're going to need to use vJunos for your lab and not vQFX.
Good luck!
------------------------------
Colin Doyle
Lead BizDev Manager - Security Strategy
Juniper Networks
https://www.youtube.com/@5minutejunos
Original Message:
Sent: 04-05-2024 03:42
From: Uni1389
Subject: Juniper Apstra
Hi Colin,
Man you are awesome. I have already followed YouTube channel and built Apstra setup by following your videos. Really i have spent lot of time with lab setup with EVE-NG is not so simple but never give up :) .
I have never did something with pristine configs and am using Apstra 4.2.1. I am attaching multiple snapshot for your analysis. Thanks in advance for your feedback.
With Regards.
------------------------------
[uni1389]
Original Message:
Sent: 04-04-2024 15:11
From: cdoyle
Subject: Juniper Apstra
Can you share your Apstra and switch versions, please?
Missing lo0.2 config suggests that the loopback for the routing-instance configured for your routing zone wasn't created. Not sure why based on this screenshot.
When you onboarded your virtual switches, did you have to ignore the pristine config validation when installing the agents?
I have a complete series for building an Apstra lab in eve-ng for 4.0.2 and 4.2.1. You can find both here. The 4.2.1 series has links to Elevate Community threads where you can download the complete companion documentation I used to record the videos.
Hope this helps!
------------------------------
Colin Doyle
Lead BizDev Manager - Security Strategy
Juniper Networks
https://www.youtube.com/@5minutejunos
Original Message:
Sent: 04-03-2024 11:54
From: Uni1389
Subject: Juniper Apstra
Hi Team ,
am trying to deploy APSTRA on EVE-NG Pro , am facing following issue to configure routing zone/virtual network . please share some feedback. if you need more information i can share it.
------------------------------
[uni1389]
------------------------------