Log in to ask questions, share your expertise, or stay connected to content you value. Don’t have a login? Learn how to become a member.
As we head into the last quarter of the year, Juniper's Innovators Circle (IC) team would like to honor members like yourself for contributing so avidly over the past few months. Your input in IC studies has been conveyed to Juniper's key decision makers, ...
Happy Friday everyone! I hope your Summer has been fun and relaxing. I hope you had a chance to recover, get some of your projects done, and spend some time with the family. Maybe you got a little travel in if you are into that. I know I ...
Don't delay, upgrade from Junos releases 12.x, 14.x, 15.x, and 16.x! Effective February 15, 2024, Junos releases 14.x and 16.x cases will no longer be eligible for technical support. Effective August 31, 2024, Junos releases 12.x ...
Elevate Community & Juniper Customers: Here at Juniper, we recognize upgrading your SRX can be a challenging and delicate process. For this reason, we developed the SRX Upgrade Guide documentation to assist you. This guide has you covered from what ...
The mode parameter sets if the relay is default open or closed for your requirement. Relay input selects the alarm criteria where the relay will switch to the other non-default position. Temperature alarm triggers are separate as you note. output ...
I don't have this setup myself, so take everything below with a grain of salt. Yes, that should be possible, though, just in case, you should double-check with your ISP to make sure they can route IPv4-Embedded IPv6 traffic. You can translate all ...
Hi. On Step 6 of page 665 of the JNCIE-ENT Self Study Bundle, we are asked to apply a BA IPv4 classifier to all L3 interfaces. In the implementation of that task, the Study Bundle applies that classifier to L2 trunk interfaces ge-0/0/3 and ge-0/0/4. ...
While you can no longer get support for your Junos 14.x and 16.x network, you CAN upgrade to a supported Junos version.