SRX

 View Only
last person joined: 13 hours ago 

Ask questions and share experiences about the SRX Series, vSRX, and cSRX.

RE: SRX - Split Tunnel - Using Juniper Secure Connect 

12-03-2021 15:22
Statistics
0 Favorited
28 Views
1 Files
0 Shares
10 Downloads
Attachment(s)
txt file
SanitizedConfig.txt   27 KB   1 version
Uploaded - 12-03-2021

Comments

12-08-2021 14:44

The traffic selector was the problem. I neded to add two traddic selector rules, one for the 172.18.0.0/22 network aone one for the 10.243.263.0/24 network, both w a remote ip of 0.0.0.0/0 so the users could access both internal letworks and the internet.  Thank you!

12-08-2021 12:24

One way I can think of is to use the traffic-selector configuration. Say you want the users to access 192.168.1.0/24 in your network, then you put this in the local source list. Then users can go to 8.8.8.8 or any other places (as long as not 192.168.1.0/24)  directly from their devices. You can have multiple traffic-selectors to cover more local resources.  Haven't tried it in the lab, though.  Check out  the user devices "route print" to see where the traffic goes.

Related Entries and Links

No Related Resource entered.