Sure... here's the vmx.conf file (currently):
##############################################################
#
# vmx.conf
# Config file for vmx on the hypervisor.
# Uses YAML syntax.
# Leave a space after ":" to specify the parameter value.
#
##############################################################
---
#Configuration on the host side - management interface, VM images etc.
HOST:
device-type : virtio
identifier : vmx1 # Maximum 6 characters
host-management-interface : eno2
routing-engine-image : "/home/clive/juniper/images/junos-vmx-x86-64-18.3R1.9.qcow2"
routing-engine-hdd : "/home/clive/juniper/images/vmxhdd.img"
forwarding-engine-image : "/home/clive/juniper/images/vFPC-20180829.img"
---
#External bridge configuration
BRIDGES:
- type : external
name : br-ext # Max 10 characters
---
#vRE VM parameters
CONTROL_PLANE:
vcpus : 1
memory-mb : 1024
console_port: 8601
interfaces :
- type : static
ipaddr : x.x.x.x
macaddr : "0A:00:DD:C0:DE:0E"
---
#vPFE VM parameters
FORWARDING_PLANE:
memory-mb : 8192
vcpus : 4
console_port: 8602
device-type : virtio
interfaces :
- type : static
ipaddr : x.x.x.x
macaddr : "0A:00:DD:C0:DE:10"
---
#Interfaces
#JUNOS_DEVICES:
# - interface : ge-0/0/0
# mac-address : "02:06:0A:0E:FF:F0"
# description : "ge-0/0/0 interface"
# - interface : ge-0/0/1
# mac-address : "02:06:0A:0E:FF:F1"
# description : "ge-0/0/0 interface"
# - interface : ge-0/0/1
# mac-address : "02:06:0A:0E:FF:F1"
# description : "ge-0/0/0 interface"
# - interface : ge-0/0/2
# mac-address : "02:06:0A:0E:FF:F2"
# description : "ge-0/0/0 interface"
# - interface : ge-0/0/3
# mac-address : "02:06:0A:0E:FF:F3"
# description : "ge-0/0/0 interface"