Hi,
Thanks for the reply
In this configuration there are two internet connections. If the primary fails, it should failover to the backup internet.
What I need is the failover to the backup internet connection.
The primary connection has a /30 subnet.
1.1.1.1 is the firewall
1.1.1.2 is the gateway
In this configuration I can't set a manage-ip for both firewalls since there are no available IP addresses.
The manage-IP in this configuration would be 1.1.1.1 for both firewalls which means no track-ip can be used.
@Edouard, am I interpetating this correct? If no Management-IP's are used on this /30 primary internet connection,
I can still use NSRP > Monitor > interface Track-ip, but only on the Master?
Normally I don't care who is the master and who is the backup, if the Master fails, the Backup becomes Master and stays that way, until something goes wrong. Although in this configuration I should problably set one device to Master. If the Master fails it turns into an (I) status, but if everything works again it should become Master again. Is this correct?
Thanks in advance
Kind Regards.