SRX

Hi everyone,

This is I am trying to accomplish:

SRX f1-199.199.199.1/30-( PROVIDER A SWITCHED NETWORK)-199.199.199.2/30 PE

       f2-200.200.200.1/30-(PROVIDER B SWITCHED NETWORK)-200.200.200.2/30 PE

We are using Static routes on SRX:

0/0 next -hop 199.199.199.2 

0/0 next-hop 200.200.200.2 Route preferrence 10

We have control only over SRX, our issue is since SRX is not directly connected to PE, therefore any break within Switched Newtork of Providers will blackhole our traffics.

This is what I am thinking:

( I do not want to use Filter based Forwarding with RPM  to keep the design simple and intutive)

1) Define RPM and then tie RPM to STATIC routes, so if RPM fails, STATIC route is removed from routing table.

I can use the link to set up desired RPM but I am trying to figure out how to associate RPM with static routes.

https://kb.juniper.net/InfoCenter/index?page=content&id=KB25052

Thanks and have a nice weekend!!

You can use event policy.

ref:

https://www.juniper.net/documentation/en_US/junos/topics/example/junos-script-automation-event-policy-change-configuration-snmp.html

https://forums.juniper.net/t5/Junos-Automation-Scripting/RPM-and-Event-Policy-Config-Change/td-p/298333

Hi Folks,

Junos Security: A Guide to Junos for the SRX Services Gateways and Security Certification is a good book covering such use cases

https://www.amazon.com/Junos-Security-Services-Gateways-Certification-ebook/dp/B0043D2E1S