Hi All,
The candidate configuration / uncommited configuration is not getting erased even after exit from the configuration mode.
I"m able to see the previously configured commands, after entering again into configuration mode.
root# show | compare
[edit interfaces fe-0/0/3 unit 0]
+ family inet {
+ address 172.16.0.1/24;
+ }
[edit]
root#
root# exit
The configuration has been changed but not committed
Exit with uncommitted changes? [yes,no] (yes) yes
Exiting configuration mode
root>
Now if i re-enter into configuraiton mode:
root> configure
Entering configuration mode
The configuration has been changed but not committed
[edit]
root# show | compare
[edit interfaces fe-0/0/3 unit 0]
+ family inet {
+ address 172.16.0.1/24;
+ }
[edit]
root#
Which i think should not be present after a exit.
How to earse it this ?
The problem is if i do some change now and then do a commit this also will get commited, right? And i don't want that.
Thanks for any inputs.
Regards,
Chandu