SRX

 View Only

  • 1.  SRX PBR (or FBF) for retrurn static routing

    Posted 09-20-2023 11:07

    Hi All,

    I would like to configure a FBF to specify a return traffic next hop in order to avoid the an asynmetric routing.

    The return packet from the serveur when reach the srx takes a different route (interface)  instead of the interface that the packet came from wich result to an asymetric routing.

    Best Regards



    ------------------------------
    OUSMANE NATHA DIARRA
    ------------------------------


  • 2.  RE: SRX PBR (or FBF) for retrurn static routing

    Posted 09-23-2023 04:24

    For FBF Please refer the doc below:

    https://www.juniper.net/documentation/us/en/software/junos/routing-policy/topics/example/filter-based-forwarding-example.html

    If you have any questions wrt the config which you are making, please reach-out. 

    Regards,



    ------------------------------
    Brijil R
    ------------------------------