Following Tests on the SRX 240
A. Does the SRX 240 gateway not use a “Shaper” any more on Layer2 (without (carriage return character)) like it used to on the J-Series
B. If Layer 1 is used, why the values do not correspond to the configuration under /class-of-service/interface/unit/shaping-rate.
Background are the following results with small and large packages: - The throughput corresponds to 6,25Mbi/s on Layer 1 with a Shaping rate of 10M approx. - With 20Mbit the throughput increases independently the package size to approx. 18Mbit/s