Hello All,
New to the board and new to Juniper. We have an SRX210 and have questions on setting up a VPN at a remote site to a Cisco ASA at the main site. The SRX at the remote site is not Internet facing. There is an ISP managed router in front of the SRX that we would connect to with a local IP.
I'm familiar with setting up VPN's, but I was wondering what kind of problems I could run into in this kind of scenario.
If the managed device is set to pass through VPN tunnel traffic, can I just go ahead and use the external IP of the remote device as my ike gateway, and just configure the VPN as normal?
Thanks,
Keith