Screen OS

 View Only
last person joined: 8 months ago 

This is a legacy community with limited Juniper monitoring.
  • 1.  Recovery help - Netscreen 5GT

    Posted 03-11-2022 05:36

    Hi there,

     

    I know that above mention device is End of sale and End of support but still it is a good device for learning so looking for support on best can do base to recover it so I can continue to learn on it.

     

    I have problem that came after screen os Upgrade . Device is not able to boot and it is complaing on Below message

     

    Juniper Networks NS-5GT-ADSL Boot Loader Version 3.1.0 (Checksum: A5AFC47B)

    Copyright (c) 1997-2005 Juniper Networks, Inc.

     

    Total physical memory: 128MB

        Test - Pass

        Initialization - Done

     

    Hit any key to run loader

    Hit any key to run loader

     

    Serial Number [0127052005000233]: READ ONLY

    HW Version Number [1010]: READ ONLY

    Self MAC Address [0010-dbb0-3730]: READ ONLY

    Boot File Name [A]: ns5gt.6.2.0r6.0

    Self IP Address [10.10.50.1]:

    TFTP IP Address [10.10.50.5]:

     

    Save loader config (56 bytes)... Done

     

    Loading file "ns5gt.6.2.0r6.0"...

    rtatatatatatatatatatatatatatatatatatatatatatatatatatatatatatatatatatatatatatatatatatatatatatatatatatatatatatatatatatatatatatatatatatatatatatatatatatatatatatatatatatatatatatatatatatatatatatatatatatatatatatatatatatatatatatatatatatatatatatatatatatatatatatatatatatatatatatatatatatatat

     

     

    Loaded Successfully! (size = 11,160,435 bytes)

     

    ********Invalid DSA signature

     

    ********Bogus image - not authenticated

     

    Juniper Networks NS-5GT-ADSL Boot Loader Version 3.1.0 (Checksum: A5AFC47B)

    Copyright (c) 1997-2005 Juniper Networks, Inc.

     

    Total physical memory: 128MB

     

    By looking at https://kb.juniper.net/InfoCenter/index?page=content&id=TSB16495&actp=METADATA I get info that problem is image Key but how to break from this loop so I can add correct image Key (new or old) so I can update image and boot device ?

     

    In fail bootloader device goes also in this sequence but no luck on boot

     

    Juniper Networks NS-5GT-ADSL Boot Loader Version 3.1.0 (Checksum: A5AFC47B)

    Copyright (c) 1997-2005 Juniper Networks, Inc.

     

    Total physical memory: 128MB

        Test - Pass

        Initialization - Done

     

    Hit any key to run loader

    Hit any key to run loader

    Hit any key to run loader

    Hit any key to run loader

     

    Loading default system image from on-board flash disk...

    19%

    29%

    45%

    99%

    100%

    Done! (size = 11,190,272 bytes)

     

    ********Invalid DSA signature

     

    ********Bogus image - not authenticated

     

    Serial Number [0127052005000233]: READ ONLY

    HW Version Number [1010]: READ ONLY

    Self MAC Address [0010-dbb0-3730]: READ ONLY

    Boot File Name [ns5gt.6.2.0r6.0]:

     

    Please advise with help.



    ------------------------------
    Ivan Galic
    ------------------------------


  • 2.  RE: Recovery help - Netscreen 5GT

    Posted 03-14-2022 12:14
    This is due to you having the old signature key, and all current software requires the updated signature key.  You'll have to reach out to JTAC for support on that.