I encountered new problem...
While i'm checking the " rn_540_r13.pdf" , I found below paragraph...
and i need Intermediate Firmware to upgrade(5.2.0pk1 -->5.2r3--> 5.4.0r13)
Caution: This release requires the SIMM DRAM upgrade to 1GB on the NetScreen-5000 Series devices. Secure Port Modules (SPMs) affected are 5000-8G2 and 5000-2XGE manufactured before 2/1/2006. If your NetScreen-5000 modules qualify for a memory upgrade, contact Juniper Networks at 1-866-369-5418 or email mailto:Junipermem@onprocess.com for a memory-upgrade kit. The memory upgrade is free for qualified users.
So i checked my machine..like below
> get system
Product Name: NetScreen-5000
Serial Number: 0040022XXXXXXXXX, Control Number: 00000000
Hardware Version: 3010(0)-(20), FPGA checksum: 00000000, VLAN1 IP (0.0.0.0)
Software Version: 5.2.0pk1.0, Type: Firewall+VPN
Base Mac: 0010.db35.e040
File Name: dd"tcp4747", Checksum: 4049e3ce
, Total Memory: 1024MB
> get chassis
Chassis Environment:
Power Supply: Good
Fan Status: Good
Battery Status: Good
CPU Temperature: 116'F (47'C)
Slot Information:
Slot Type S/N Assembly-No Temperature
1 Management 0039022004000051 0024-005 116'F (47'C)
2 Processing-8G 0038022004000011 0025-006 100'F (38'C)
Alarm Control Information:
Power failure audible alarm: enabled
Fan failure audible alarm: enabled
Low battery audible alarm: enabled
Temperature audible alarm: disabled
Normal alarm temperature is 132'F (56'C)
Severe alarm temperature is 150'F (66'C)
Q1. How can i find out the manufactured date of this mahine? and Do i need to upgrade memory?
Q2. What is the SPM(Secure Port Module)? Where can i check this?
Actually I'm not sure that there is going to be OK to proceed this upgrade job?
Very much thanx...anyway...