Screen OS

 View Only
last person joined: 8 months ago 

This is a legacy community with limited Juniper monitoring.

  • 1.  NS25 with multiple internet connections?

    Posted 10-14-2008 12:29

    I have a NS25 running ScreenOS 5.0.0

     

    We are using Ethernet 1 untrust and Ethernet 3 as untrust. I also have several VPN connections setup using AutoKey IKE and xAuth users. (bear with me here, it's been 4 years since I set all the VPN stuff up and all I have to do now is add an xAuth user so I may be off on protocol names)

     

    Our current T1 is being maxed out and our local cable company is offering a 16x2 at a very affordable price.

     

    What I want to do is plug the new cable connection into Ethernet 4 which is currently unused and route all HTTP traffic through it leaving my exchange server and VPN connections to use the T1 on ethernet 3. Is this possible?

     

    Regards

     

    Victoria



  • 2.  RE: NS25 with multiple internet connections?
    Best Answer

    Posted 10-14-2008 12:37

    Hi,

     

    Upgrade to the latest version of code for the NS25 5.4r10. Then you will be able to use something called PBR (Policy Based Routing). You will then be able to then specify that  http traffic goes out of eth4 and then everything else goes out the other interface.

     

    Information on the forum about PBR and information in the Concepts and Examples 

     

    http://www.juniper.net/techpubs/software/screenos/screenos5.4.0/index.html

     

    Regards

     

    Andy



  • 3.  RE: NS25 with multiple internet connections?

    Posted 10-14-2008 12:57

    Fantastic, Thankyou for the prompt and helpful reply 🙂

     

    Victoria