SRX

 View Only
last person joined: 7 hours ago 

Ask questions and share experiences about the SRX Series, vSRX, and cSRX.
  • 1.  No Internet Traffic passed thorugh to WAN from LAN

    This message was posted by a user wishing to remain anonymous
    Posted 06-12-2024 21:03
    This message was posted by a user wishing to remain anonymous

    Hi All, 

    I have a juniper SRX 320 on packet mode and connected to internet via a 4G uplink. I can access the router externally without any issues. I also have a public subnet routed over this 4G connection and configured on the LAN interfaces of the Juniper SRX320 with no NAT. I can source the public WAN IP of the device and ping 8.8.8.8. However when i source the public LAN interface IP (the interface is up and no routing issues with the public subnet), i do not get any ping responses. I can not ping the public IP of the LAN interface externally either. The juniper was on flow mode before and was experiencing the same issue. 

    Any suggestions?

    Regards 



  • 2.  RE: No Internet Traffic passed thorugh to WAN from LAN

    Posted 06-13-2024 11:31

    Share config perhaps, to give clues.



    ------------------------------
    Nikolay Semov
    ------------------------------