SRX

 View Only
last person joined: yesterday 

Ask questions and share experiences about the SRX Series, vSRX, and cSRX.

  • 1.  NAT feature query

    Posted 10-23-2009 14:51

    IN the source-nat allow-incoming command, documented here:

    http://www.juniper.net/techpubs/software/junos-es/junos-es93/junos-es-swcmdref/allow-incoming.html#jN211E2

    Please take a look at the above.  The document specifically says:

    Description
    Enable the source IP address pool for the interface to support incoming voice over IP (VoIP) calls.
    This statement is supported on J-series devices.

    Does this mean that *ONLY* VOIP is allowed incoming?  Or are other incoming services (such as Video) also allowed?

    The idea of “allow-incoming” sounds good.  If that doesn’t work, I’d imagine we’d have to use both source and destination NAT.

     

     

    --ash



  • 2.  RE: NAT feature query
    Best Answer

    Posted 10-23-2009 14:52

    this feature only supports VOIP.

     

    thanks

    raheel anwar



  • 3.  RE: NAT feature query

    Posted 10-23-2009 23:20

    If you have enough public IPs you can always use static NAT if you need bi-directional traffic to be NAT'd. Perhaps you could explain some more what are your specific requirements and scenario.

     

    -Richard