SRX

 View Only
last person joined: 4 hours ago 

Ask questions and share experiences about the SRX Series, vSRX, and cSRX.

  • 1.  Mix of SRX340 and SRX345 in the same HA virtual chasis (cluster)

    Posted 12-06-2023 11:28

    Hi,

    the customer have existing SRX340 in production, and now have intention to add SRX345 in HA mode. Is it possible? In documentation it is writen that you can put in same HA cluster only same models, but this two models are phisicalz same only performace are different.

    Thank you in advance,

    Vik



  • 2.  RE: Mix of SRX340 and SRX345 in the same HA virtual chasis (cluster)

    Posted 12-06-2023 20:25

    SRX chassis cluster is only supported on identical model pairings.  

    There are power architecture and internal switching differences between the srx340 and srx345.

    If you can't get identical models you would have to use other failover options like vrrp or dynamic routing.  But these will not share session tables so there is generally a service disruption during the failover process while new sessions are established.



    ------------------------------
    Steve Puluka BSEET - Juniper Ambassador
    IP Architect - DQE Communications Pittsburgh, PA (Metro Ethernet & ISP - Retired)
    http://puluka.com/home
    ------------------------------

    Original Message


  • 3.  RE: Mix of SRX340 and SRX345 in the same HA virtual chasis (cluster)

    Posted 12-07-2023 01:52

    Thank you very much for your quick reply. I also assumed so according to the documentation, but I had to check because these two models seemed somewhat similar to me. It's much clearer to me now.


    Original Message