Hi Everyone,
I'm having problems making DNAT/Port Forward work on my SRX345 device. I'm trying to make a PPTP connection to be port forwarded to Internal Server.
Dnat Pool = Server .112 and port 1723
SERVER = Server .112 (LAN)
Public IP of SRX = PUBLIC IP .116 (WAN)
Here is the configuration of Nat Destination in SRX.
My testing was successful since it is visible in the hit-count. This just means that there is no error in dnat configuration. See below:
Packet Capture on Server side shows that Public IP was not being translated by SRX. The IP 124.105.26.249 is the Public Address of my test Machine that is trying to connect to Public IP .116 (SRX)
Additional Information:
Server .112 is a directly connected network to SRX.
This was a working PPTP configuration on previous Firewall. Since we changed to SRX, it's not working.
Any ideas that I can check? Thanks!