Log in to ask questions, share your expertise, or stay connected to content you value. Don’t have a login? Learn how to become a member.
HI : Ho do you enable IGMPv2 multicast on the SRX 240 ? I have 2 interface , which require IGMP multicast to be enabled.
Also, are there any know issues with multicast on version11.2R4.3;
Would appreciate the help
thank you
To enable IGMP for a particular interface:
set protocols igmp interface fe-0/0/0
Here's a KB on enabling PIM which uses IGMPv2
http://kb.juniper.net/InfoCenter/index?page=content&id=KB24781&actp=RSS&smlogin=true
And don't forget host-inbound-traffic protocols igmp on zone or zone interface level ........
Thank you.Below is the config used
protocols {
igmp {
interface ge-0/0/3.0 {
version 2;
}
interface ge-0/0/4.0 {
security-zone trust {
host-inbound-traffic {
system-services {
all;
interfaces {
ge-0/0/3.0 {
ge-0/0/4.0 {
Glad it worked for you....
Now you can mark as accepted solution 😉