SRX

Somebody please help me on this.
I'm using SRX300 with one Wan connection.

I want to do load balance for one praticular static IP incoming request distributing within 3 servers.

Example: I'm receiving incoming request for Static IP 123.123.123.123 to port 8080 and I want do load balance request within 3 local server (192.168.1.100 , 192.168.1.101 and 192.168.1.102) by Round Robin, Weights parameter to port 8080

Scratched in a notepad. Not tested.

set security nat destination pool dst-nat-pool-1 address 192.168.1.100/32 to 192.168.1.102/32
set security nat destination rule-set rs1 from interface ge-0/0/0.0
set security nat destination rule-set rs1 rule r1 match destination-address 123.123.123.123/32
set security nat destination rule-set rs1 rule r1 match destination-port 8080
set security nat destination rule-set rs1 rule r1 then destination-nat pool dst-nat-pool-1
set security nat proxy-arp interface ge-0/0/0.0 address 123.123.123.123/32
set security address-book global address server1 192.168.1.100/32
set security address-book global address server2 192.168.1.101/32
set security address-book global address server3 192.168.1.102/32
set security policies from-zone untrust to-zone trust policy server-access match source-address any
set security policies from-zone untrust to-zone trust policy server-access match destination-address [server1 server2 server3 ]
set security policies from-zone untrust to-zone trust policy server-access match application http-8080
set security policies from-zone untrust to-zone trust policy server-access then permit

Regards, Wojtek

Can you share WebUI method.