I've zabbix monitoringn tool which works on SNMP so i think if my device can send snmp info for 'st' nterfaces then i can get the traffic stats.
But i couldn't see an option to set speed on the st interfaces, any idea ? Or am i travelling in the wrong direction?
# set interfaces st0 unit 111 ?
Possible completions:
<[Enter]> Execute this command
+ apply-groups Groups from which to inherit configuration data
+ apply-groups-except Don't inherit configuration data from these groups
description Text description of interface
disable Disable this logical interface
encapsulation Logical link-layer encapsulation
> family Protocol family
multipoint Multipoint connection
no-traps Don't enable SNMP notifications on state changes
point-to-point Point-to-point connection
> ppp-options Point-to-Point Protocol interface-specific options
> radio-router Parameters for dynamic link cost management
traps Enable SNMP notifications on state changes
| Pipe through a command
{primary:node0}[edit]
# set interfaces st0 unit 111 family ?
Possible completions:
+ apply-groups Groups from which to inherit configuration data
+ apply-groups-except Don't inherit configuration data from these groups
> inet IPv4 parameters
> inet6 IPv6 protocol parameters
> mlfr-end-to-end Multilink Frame Relay end-to-end protocol parameters
> mlfr-uni-nni Multilink Frame Relay UNI NNI protocol parameters
> mlppp Multilink PPP protocol parameters
> mpls MPLS protocol parameters
> vpls Virtual private LAN service parameters
{primary:node0}[edit]
# set interfaces st0 unit 111 family inet ?
Possible completions:
<[Enter]> Execute this command
> address Interface address/destination prefix
+ apply-groups Groups from which to inherit configuration data
+ apply-groups-except Don't inherit configuration data from these groups
mtu Protocol family maximum transmission unit
negotiate-address Negotiate address with remote
> next-hop-tunnel One or more next-hop tunnel tables
no-neighbor-learn Disable neighbor address learning on interface
> sampling Interface sampling
unconditional-src-learn Glean from arp packets even when source cannot be validated
| Pipe through a command
{primary:node0}[edit]
# set interfaces st0 unit 111 family inet
Regards,
Chandu