View Only
last person joined: 2 days ago 

Ask questions and share experiences about the SRX Series, vSRX, and cSRX.
  • 1.  How to check Natted IP for Particular IP.

    Posted 06-07-2023 01:29

    Hi Guys,

    How to check (Command) Natted IP for particular IP Address or Subnet in Juniper SRX Firewall.Please help.

    and how to configure Natted IP for particular IP.


    Nat IP -----> 

    Please help on this.



    Rakesh A

  • 2.  RE: How to check Natted IP for Particular IP.

    Posted 06-09-2023 06:28
    Edited by spuluka 06-09-2023 06:28

    There is a whole hierarchy of operational commands to check on nat status under:

    show security nat ?

    First there are 3 kinds of nat destination, source and static (where an address is mapped to another one for both source and destination)

    So you would need to adjust the details of the command to see the nat status of what the address is and how it is configured on the device.

    Here is one of the documentation links and on the left you can see other options.

    Steve Puluka BSEET - Juniper Ambassador
    IP Architect - DQE Communications Pittsburgh, PA (Metro Ethernet & ISP - Retired)