SRX

 View Only
last person joined: yesterday 

Ask questions and share experiences about the SRX Series, vSRX, and cSRX.

  • 1.  How do I perform the equivalence of "debug ip packets" on the Juniper side and also where are the debug logs stored by default?

    Posted 01-22-2014 19:02

    Hi,

     

     

       How do I perform the equivalence of "debug ip packets" on the Juniper side and also where are the debug logs stored by default?


    #routing
    #Juniper
    #monitor
    #SRX
    #logs
    #syslogs


  • 2.  RE: How do I perform the equivalence of "debug ip packets" on the Juniper side and also where are the debug logs stored by default?

    Posted 01-22-2014 23:54

    Hi,

     

    Debuging on  a srx can be done with setting security flow traceoptions. You can use basic-datapath as flag and specify a packet filter and output file. The file will be placed in /var/log and can be viewed with "show log <file>.

     

    So you have to make a tiny change to the config and commit it. In the X46 version which is comming out soon debuging can be done with an operational command.



  • 3.  RE: How do I perform the equivalence of "debug ip packets" on the Juniper side and also where are the debug logs stored by default?
    Best Answer

    Posted 01-23-2014 03:13

    I think the specific trace options you are looking for would be outlined in kb16233

     

    http://kb.juniper.net/KB16233

     

    You may find the collection of troubleshooting options listed in kb15779 also helpful.

     

    http://kb.juniper.net/InfoCenter/index?page=content&id=KB15779