Screen OS

 View Only
last person joined: 10 months ago 

This is a legacy community with limited Juniper monitoring.
  • 1.  Change Ethernet Interface

    Posted 05-06-2010 01:34

    Hello,

     

    Product: SSG-350

    Untrust: Ethernet0/2 (Coper)

    Untrust: Ethernet3/1 (Fiber)

     

    I want to configure the firewall with all the policy's, MIP's and so on.  Currently the untrust interface is ethernet0/2. When the SSG-350 is going to production I want to use the ethernet3/1 as the untrust interface.

     

    Can i do just before the SSG-350 is going to production a export from the current config and change all the ethernet0/2 ports to ethernet3/1 and do import from the changed config file ?

     

    Will this work ?

     

     

     



  • 2.  RE: Change Ethernet Interface
    Best Answer

    Posted 05-06-2010 01:53

    Reading a post before, if the interface is in NAT mode, then need reconfigure the interface perameters mannually. If in the Route mode, then would be fine.


    #NAT
    #Route
    #Mode


  • 3.  RE: Change Ethernet Interface

    Posted 05-06-2010 02:06

    The untrust interface is in Route mode.

     

    Thanks for your answer.

     

     



  • 4.  RE: Change Ethernet Interface

    Posted 05-06-2010 02:56

    I have moved a configuration from SSG140 to SSG520 this way and it worked fine.

     

    Kind regards

    Edouard