Hi All,
I am new in SRX. I need to setup 2 route based VPN with failover by dual WAN environment, but I found that I cannot access both WAN ports from outside at the same time. When I can access the IP address on port ge-0/0/4.0, I cannot access the IP address on port ge-0/0/8.0. Opposite, when I can access the IP address on port ge-0/0/8.0, I access ping the IP address on port ge-0/0/4.0. Is it a problem of routing?
Here is the result of "show route":
inet.0: 7 destinations, 7 routes (7 active, 0 holddown, 0 hidden) + = Active Route, - = Last Active, * = Both
0.0.0.0/0 *[Static/5] 03:48:56 to 1.1.1.10 via ge-0/0/4.0 > to 2.2.2.10 via ge-0/0/8.0
192.168.1.0/24 *[Direct/0] 21:43:15 > via vlan.0
192.168.1.1/32 *[Local/0] 21:43:41 Local via vlan.0
2.2.2.0/24 *[Direct/0] 03:48:56 > via ge-0/0/8.0
2.2.2.1/32 *[Local/0] 03:49:03 Local via ge-0/0/8.0
1.1.1.0/24 *[Direct/0] 03:48:56 > via ge-0/0/4.0
1.1.1.1/32 *[Local/0] 03:49:03 Local via ge-0/0/4.0