Hi folks,
I upgraded ScreenOS 6.3.0r17.0 to 6.3.0r19.0.
However, the device still has "6.3.0r17.0".
So, I figured out that I should upgrade imagekey and Bootloader first.
The issue appeared at this time...!
********Invalid DSA signature
********Bogus image - not authenticated
[More specifically below..]
Juniper Networks ISG Series BootROM V1.1.1 (Checksum: 88D32336)
Copyright (c) 1997-2008 Juniper Networks, Inc.
Total physical memory: 1024MB
Test - Pass
Initialization........ Done
Hit key 'X' and 'A' sequentially to update OS Loader....
Loading OS Loader from on-board flash memory... +++
Done!
********Invalid DSA signature
********Bogus image - not authenticated
Serial Number [0133122008000291]: READ ONLY
BOM Version [E07]: READ ONLY
Self MAC Address [0022-83a3-cb80]: READ ONLY
OS Loader File Name [imagekey.cer]: imagekey.cer
Self IP Address [192.168.1.1]: 192.168.1.1
TFTP IP Address [192.168.1.250]: 192.168.1.250
Ip Address Mask [255]: 255.255.255.0
Default Gateway IP [0]: 192.168.1.250
Loading file "imagekey.cer"...
r!r!r!r!r!r!r!r!r
The point is red sentence I indicated.
No matter how I typed it Load1000v103.d(you know, it is Bootloader), imagekey.cer(I was definitely new imagekey)
and I also tried to downgrade "6.3.0r17.0" version.
I tried all I know idea, but occansionally this was failed.
I am very worried about it. actually I must be handing out it to my customer;
Plus, what is the meaning of "r!r!r!r!r!r!r!r!r!r!r!r!"???
I hope anyone of you have any suggestion what I can try now.
Regards,