View Only
last person joined: 4 hours ago 

Discover how to get the most of Juniper labs and share what you've built.


Discover how to get the most of Juniper labs and share what you've built.

To easily navigate to other communities, select Communities > All Communities in the navigation. 

Latest Discussion Posts

  • Profile Picture

    Trunk interface not working

    Hi ! I'm currently studding for Junos service provider exam. I'm using V-LAB to experiment my reading. In order to teste my knowledge I use topology "BGP - Multi-AS with Dual Route Reflectors" in V-LABs. I load factory-default configuration ...

  • Yes, that is a helpful document. It turns out that the .yml file existed, but was different. I've since attempted a new lab, and et-0/0/0 is behaving as expected. Thanks for the clarification :D ------------------------------ SIMON BROOKS --------- ...

  • Have been configuring using the unchannelized, or at least not setting the channelized configuration. I will check Vignesh's response below, as the yml config doesn't match what I have in the EVE-NG. thanks. ------------------------------ SIMON ...

  • Thanks, I will check this. ------------------------------ SIMON BROOKS ------------------------------

  • I see you are using latest 23.2 image. Hope you are using the below yml config at EVE root@eve-ng:/opt/unetlab/html/templates/intel# ...

  • Are you running in channelized or unchannelized mode? And which release of vJunosEvolved? Art ------------------------------ Art Stine ------------------------------

  • Hello, Firing up the evo image for the first time, I used et-0/0/0 to start with, and nothing came up. Ran a wireshark and could see LLDP packets starting on et-0/0/4. Checked with further interfaces and continues to go up but not start at et-0/0/0 ...

Unanswered Posts

  • 1 person recommends this.

Top Contributors in the Community