Log in to ask questions, share your expertise, or stay connected to content you value. Don’t have a login? Learn how to become a member.
Discover how to get the most of Juniper labs and share what you've built.To easily navigate to other communities, select Communities > All Communities in the navigation.
Hi ! I'm currently studding for Junos service provider exam. I'm using V-LAB to experiment my reading. In order to teste my knowledge I use topology "BGP - Multi-AS with Dual Route Reflectors" in V-LABs. I load factory-default configuration ...
Yes, that is a helpful document. It turns out that the .yml file existed, but was different. I've since attempted a new lab, and et-0/0/0 is behaving as expected. Thanks for the clarification :D ------------------------------ SIMON BROOKS --------- ...
Have been configuring using the unchannelized, or at least not setting the channelized configuration. I will check Vignesh's response below, as the yml config doesn't match what I have in the EVE-NG. thanks. ------------------------------ SIMON ...
Thanks, I will check this. ------------------------------ SIMON BROOKS ------------------------------
I see you are using latest 23.2 image. Hope you are using the below yml config at EVE https://community.juniper.net/blogs/shalini-mukherjee/2023/05/11/deploying-vjunos-in-a-bare-metal-eve-ng-server root@eve-ng:/opt/unetlab/html/templates/intel# ...
Are you running in channelized or unchannelized mode? And which release of vJunosEvolved? Art ------------------------------ Art Stine ------------------------------
Hello, Firing up the evo image for the first time, I used et-0/0/0 to start with, and nothing came up. Ran a wireshark and could see LLDP packets starting on et-0/0/4. Checked with further interfaces and continues to go up but not start at et-0/0/0 ...