SRX Next-Gen Firewalls

You might find this support article useful. https://supportportal.juniper.net/s/article/Recovering-the-device-when-stuck-in-boot-load-for-SRX300-series?language=en_US Regards,

I've upgraded a SRX345 and SRX300 following this link - best to backup your config and have a console access during upgrade: I'm now on srx24.4r1-s2 which is lot more stable... SRX300-series requirements for upgrade to Junos 24.4R1 and higher ...

We have a Juniper SRX320 that I was trying to upgrade to the latest Junos 24.4, but has given errors during that process. It was functional running 20.2R3-S2.5 with a basic config to allow network connectivity and ssh access. Following TSB92728 , ...

For the traffic to use the vpn connection the source and destination addresses have to be setup as allowed by the VPN configuration. And the routing on both sides of the tunnel also has to select the tunnel as the destination for that traffic. Is ...

Not at all. I'm simply pointing out a DDoS mitigation feature in the SRX. I just don't have the hard numbers you're seeking to draw a conclusion one way or the other. ------------------------------ Nikolay Semov ------------------------------

Nikolay Semov, I have reviewed your message. From your correspondence, I understand that you have doubts about whether the SRX4600 device can provide effective protection against DDoS attacks. Thank you for the document you shared. Indeed, you've provided ...

An interesting relatively recent feature related to DDoS mitigation, should you end up going with the SRX: https://supportportal.juniper.net/s/article/SRX-About-drop-flow ------------------------------ Nikolay Semov ------------------------------