SRX Next-Gen Firewalls

You can either look (I'm looking on an SRX340) under Administration -> license management From the CLI, the command is "show system license" typically, the SRX340 allows for 2 "dialup" or Dynamic VPN users out of the box. If you want more, you have ...

Hi Guys, We are using a 1500 SRX Firewall, My doubt is how many Juniper Secure Connect users are (Remote access/SSL VPN) supported by My Srx firewall. Please help on this. Regards, Rakesh ------------------------------ Rakesh A ------------ ...

Hi Prachi, The Junos install from TFTP starts correctly, but fails due to "xhci0: ERROR! xhci_timeout: transfer timeout, id 62". That is a USB related hardware failure. In case you have a USB stick inserted (doesn't look like it from the ...

UPDATE - It looks like the unit was having an issue with a failing internal FLASH storage. It finally bit the dust last week. Looks like this a Juniper acknowledged problem with older SRX300 series with an earlier revision eUSB storage module. discussed ...

Hi Casper, I appreciate your reply. At present I can access only U-boot and loader prompts, unable to access Shell. sharing SRX300 details after I use Install command is as below. Octeon srx_300_ram# reset SPI stage 1 bootloader (Build time: ...

Not an anomaly. I have several SRX240s that ended service because of flash errors. I learned early logging clobbers the FLASH storage in the units. Now I'm starting to see my first issue with FLASH storage on SRX340s that replaced the SRX240s. Like ...

Hi Prachi, BIOS files are included in Junos itself. There is no need to use external files. You can check which BIOS is installed and which is available to install with your current Junos release using the command "show system firmware". Newer Junos ...