SRX Next-Gen Firewalls

When an SRX is in cluster mode certain configurations and status can cause interfaces to go inactive. And on some models optical ports with multiple option settings will not show up unless the optic is present. But neither of these is likley to show ...

new SRX || the interfaces dont appear in show interface terse Srx2300 and it is just mounted when i tried to run show interface terse the physical interfaces not shown root> show interfaces terse | no-more Interface Admin Link Proto ...

Hi, sorry for the late reply, have been real busy with my internship. I suspect the reason why my initial config didn't work is due to the 'mgmt' name. However, is possible for you to provide a psuedo-config? Thanks! ------------------------------ Ong ...

Thank you fb35523. You have given me clarification on this matter. As I suspected it was due to a limitation, but I was not sure if it was an issue of misuse. My question really should have included scalability as per each trunk link, i.e. 1-4, etc ...

I havve worked with MLT, SMLT and R-SMLT in Avaya switches in the past. As Extreme Networks bought the Avaya networking part, they also own the MLT technology. MLT is equivalent to LG, or aggregated Ethernet as Juniper calls it. You can run LACP over ...

Looks like the maximum number of member links for the SRX series is 16 members. ------ A physical interface can be added to any aggregated Ethernet interface as long as all member links have the same link speed and the maximum number of member links ...

I am only worried about how SRX Series supports my multilink trunks in my avaya switch cluster. The need to try to extend my trunks through these SRX's is my goal for now. The link I gave is the BASE for the technology. I realize that how my avaya cluster ...