SRX Next-Gen Firewalls

 View Only
last person joined: 22 hours ago 

Ask questions and share experiences about the SRX Series, vSRX, and cSRX.

Welcome!

If you have a question or a use case, likely there are others who are experiencing or worked through the same thing. Don't hesitate to jump in and ask or share your knowledge!

Need additional guidance?  Check out these Juniper Resources.

Juniper Threat LabsSRX Upgrade Guide Security Advisories Technical Bulletins

Latest Discussion Posts

  • Hi All, I would like to configure a FBF to specify a return traffic next hop in order to avoid the an asynmetric routing. The return packet from the serveur when reach the srx takes a different route (interface) instead of the interface that the ...

  • I'm relatively new in SRX. I have a next one problem: We have a SRX1500 in cluster and work for our network. We want to add the traffic from other clinet to our SRX1500 and to divide from our. I rewrote the configuration of the other SRX in the ours ...

  • Good day, Today i am at the customers location. We have made the ipsec from Teltonika to SRX. as traffic selectors i added 192.168.20.0/24 > 192.168.10.0/24 192.168.20.0/24 > 192.168.0.0/24 I am able to ping devices in the head office location ...

  • Hi Everyone, I'm doing a lab on vSRX. I'm wondering that webFilter doesn't work if I add protocol icmp. Here is the command it was. set firewall family inet filter webFilter term 1 from protocol icmp I tried to create an other filter to blind the ...

  • Hello Gavin, Thanks for your reply ! I found a solution before I get your return ! Here is my configuration : services { rpm { probe WAN1-monitor-1 { test monitor-1 { probe-type icmp-ping; ...

  • It has been weeks and did not get any help on this would anyone take a minute and help me I am really stuck and am hoping that this forum can help. ------------------------------ JAY ECHOUAFNI ------------------------------

  • Hi Melih, There is a version of JunOS I have seen where the ip-monitoring state flag would get stuck, would you mind sharing your code version and the service { rpm & ip-monitoring} configuration snips? With internet failover you must ensure you have ...

Unanswered Posts

Top Contributors in the Community