SRX Next-Gen Firewalls

Hello Rakesh, You can configure a security policy and apply it on the top so that the traffic will be blocked. example: set security address-book global address BLOCKED-Address 192.168.0.1 set security policies from-zone trust to-zone untrust ...

Hi Guys, We have a requirement from client below,we using SRX 1500 firewall. Please help on this to check...... ""We received a request from the government about block the IP 141.y.x.x to be reach by the users attached to the network."" ...

hello Traffic selector : It decides what traffic should be allowed through the tunnel. Encryption Domain: It is basically the mapping of source and destination which should traverse through the VPN for phase 2 negotiation, which terms ...

I don't know of documentation for this scenario but the default configuration for the trust vlan. You can look at the default configuration at any time by running this in configuration mode. Just be sure not to commit the change and to rollback when ...

Hi Brijil, What is the use of Traffic selector ,Encryption Domain and for phase 2 negotiation, which terms we used(these three terms right IPsec proposal, IPsec policy, IPsec vpn) Thanks Rakesh ------------------------------ Rakesh A - ...

Local IP ( the local user / network ip which needs to be passed via VPN) remote tunnel-ip ( The ip of User's / network on the remote side which should be accessed via VPN ) Local IKE-ID: The Identity of your negotiation, either you can configure ...

Hi Spuluka,Thank you for your reply. ------------------------------ Rakesh A ------------------------------