SRX Next-Gen Firewalls

I haven't used it for JSC specifically, but generally NPS works fine with JunOS. Since you're getting rejections from the NPS, check its logs to see if you can see any clues for the rejection. You can also experiment with the authentication methods on ...

That's surprising. I have a 340 which did raise a minor alarm about this not too long ago. If you have auto-snapshot enabled, though, you wouldn't get an alarm. ------------------------------ Nikolay Semov ------------------------------

I use this policy to allow users to authenticate in the Windows domain : policy MS_DYNAPP { match { source-address any; destination-address [ DC1 DC2 ]; dynamic-application [ junos:LDAP junos:CLDAP junos:NBNS junos:MSRPC ...

I've only done vpls port mirrors on mx devices so not sure if it is supported on the SRX. But here is the kb on the setup. https://supportportal.juniper.net/s/article/MX-How-to-configure-Layer-2-VPLS-Port-Mirroring ------------------------------ ...

I will certainly do what has been recommended. I realize I need to make some changes to my equipment. I use it as an intermediate device. It has use, and safety is a concern. Thx, Puluka ------------------------------ Adrian Aguinaga B.S.C.M. I.T.T. ...

Hello everyone, I'm currently working on monitoring the traffic exchanged with one of our clients using either SRX1500 or SRX550, both running software version 19.4. We're utilizing a VPLS connection for this communication. I'd like to implement a port ...

Hello, my SRX300 says that it boots from the backup partition: *********************************************************************** ** ** ** WARNING: THIS DEVICE HAS BOOTED FROM THE BACKUP JUNOS IMAGE ** ** ** ** It is possible that the ...