Switching

Hello, we are experiencing problems trying to connect an old VC EX4200-4550 (with 2x EX4450) and a 2x Aruba 8360 VSX with 2x 10Gbit/s f.o. links and LACP. Physical and LACP links go up, but the logical link doesn't work properly. Examples: some ...

Hello experts ! I have Juniper EX2200 48P 4G, which I reset using the 'request system zeroize' command Password and name are set, ssh is configured. The device, when connected to the network via the "MGMT" port, received ...

Thanks for the advice, unfortunately there is nothing displaying on the console at power up. So it is not possible to interruptthebootloader because the machine doesn't seem to be able to get past P.O.S.T. ------------------------------ BRIAN LONGWE ...

Another option would be to create a bootable USB from install media. Then you need console access to interrupt the boot cycle at the loader screen and do the format install from this prompt. The details are here. https://supportportal.juniper.net/s/article/EX4400-Format-Install-Procedure?language=en_US ...

Hi, Have tried this but the device is not getting to the point where it chooses to boot from usb. Fans keep spinning up then down continuously. Any thoughts? ------------------------------ BRIAN LONGWE ------------------------------

That makes complete sense. Appreciated!! ------------------------------ Be kind!! ------------------------------

The filter above will deny all traffic to address 172.16.100.2/32. In filters once a match occurs all processing stops. So to allow icmp to 172.16.100.2/32 you would need an accept term just for icmp followed by the reject term above. ------------------------------ ...