Switching

 View Only
last person joined: 2 days ago 

Ask questions and share experiences about EX and QFX portfolios and all switching solutions across your data center, campus, and branch locations.

If you have a question or a use case, there are likely others experiencing or who worked through the same thing. Don't hesitate to jump in and ask or share your knowledge!

Need additional guidance?  Check out these Juniper Resources.

Documentation Knowledge Base Day One Books Free Trial

Latest Discussion Posts

  • Try "ping google.com inet" to force ipv4 pings. root@SW001> ping google.com inet PING google.com (142.250.204.14): 56 data bytes 64 bytes from 142.250.204.14: icmp_seq=0 ttl=111 time=63.596 ms 64 bytes from 142.250.204.14: icmp_seq=1 ttl=111 time=52.133 ...

  • This is defaulting to ipv6 and the routing on that lookup is not working. To ping on ipv4 by name add inet to the string ping inet google.com ------------------------------ Steve Puluka BSEET - Juniper Ambassador IP Architect - DQE Communications ...

  • Profile Picture

    DNS lookup not working

    I'm new to Junos-based switching. I have a simply setup with name-server defined under system. I do not have any routing instances defined. I do not have any forwarding-options set nor any firewall configuration. I have a default gateway set. I am ...

  • So I'm looking for a complete dump of the MAC address table and ports like this: root@m24-114t-sw-4> show ethernet-switching table | except xe-0/2/0.0 MAC flags (S - static MAC, D - dynamic MAC, L - locally learned, P - Persistent static, C - Control ...

  • Hi Support, This support case status is currently resolved. After much troubleshooting with your colleague from Juniper support, over tracing the traffic package and wireshark etc, we finally went through the physical configuration statements ...

  • It is the dcpfe, the pfe process that used .16 address. ------------------------------ Jibu Thomas ------------------------------

  • Hi Steven, Is the DHCP scope and configuration on the EX4100? If yes, can you kindly share the DHCP configuration? Also, the output of "show dhcp server binding detail" as well. Regards ------------------------------ Sheetanshu Shekhar -------- ...

Announcements

  • Introducing Juniper Support Portal (JSP) Mobile App for iOS

    The Juniper Support Portal (JSP) Mobile App is now available for customer use on iOS platforms. The app is designed to provide mobile access for on-the-go service support. 

    What’s available?

    • Live Chat Support
    • Instant Notifications
    • Knowledge Base Access 

Unanswered Posts

  • 1 person recommends this.

Top Contributors in the Community