Switching

Try "request system snapshot recovery" instead of it. ------------------------------ BALAZS KISS ------------------------------

I don't believe there was ever an option for snapshotting internally on the EX4600 and EX4300-MP. Snapshotting is available on the standard EX4300's just not the Multigig ones. ------------------------------ HARRY ------------------------------

Hi Spuluka Big Thanks for your reply . We have already reformatted the switch for now . I will try the same in the next switch if i get the same issue . ------------------------------ Rahul Aswal ------------------------------

You could try loading the factory default configuration then setting the root password. load factory-default ------------------------------ Steve Puluka BSEET - Juniper Ambassador IP Architect - DQE Communications Pittsburgh, PA (Metro Ethernet ...

When did the snapshot feature change for the EX4600 and EX4300's? Was it hardware, or JUNOS "enhancements"?

Hi Todd Thanks for your reply . Its a version 12.0 old switch with NO configuration and one of our Field engineer was trying to set root authentication password to it . However, the device is showing that attached error . On further troubleshooting ...

Hi, There is no alternative partition to snapshot on the EX4600 and EX4300-MP devices. The EX4600's let you snapshot to a USB drive and the EX4300-MPs don't support the snapshotting feature. Many Thank ------------------------------ HARRY --- ...