Switching

Hi, I've created FW filter: family ethernet-switching { filter by_dest_ip { term 1 { from { ip-protocol icmp;} then { forwarding-class no-loss; loss-priority ...

Good day everyone, I have a question in regard to the QFX5120-48YM switch and SFP GbE module compatibility. These switches were purchased for our department to replace Cisco 6509 core switches and as such have a requirement to service both optical ...

Hi Guys I am new to juniper . So my apologies if my query seems too basic . But we getting this error while trying to commit . any solutions . I am sharing the screenshot for the error ------------------------------ Rahul Aswal ...

At a high level there are three general ways the SRX clustering examples are setup. This network configuration example document goes over all three methods in detail. You should be able to pick the one that fits your comfort for redundancy. Note that ...

Hi, First my apologies if this was previously posted and or should be in the SRX community. I am having an issue and cannot find a proper solution and or I do not like the solution. I have an EX stack with multiple switches. I have an ...

Hi, I would recommend speaking with your Juniper partner is, or who you 'may' potentially be purchasing these devices from; they'd be able to give you more information about the replacement series device and would clear up any questions you've got, ...

Hi, I can't seem to test this in a lab environment due to me not having this specific device, however I've looked online and found the data sheet that may provide you with some more information: https://www.juniper.net/content/dam/www/assets/datasheets/us/en/switches/ex4650-ethernet-switch-datasheet.pdf ...