Switching

I would like to whitelist the IP addresses on the aggregated interface. I've done the configure on EX4200 and it works as expected. This is what I've done on EX4200: > show configuration interfaces ae11 aggregated-ether-options { lacp { ...

An example that would block inbound ntp requests to the switch and allow all other into switch traffic. set firewall family inet filter ntp term block-ntp from protocol udp set firewall family inet filter ntp term block-ntp from destination-port ...

Hello everyone, I try to work with Juniper first time. Need help with virtual-chassis. I made all like in this video https://www.youtube.com/watch?v=1OWljMuijq4 but it doesn't work. Conf of slave switch is below root@SLAVE# show ## Last changed: ...

I'd like to echo the previous request. Could you share the configuration that kept the switch from responding to mode 6 queries, but still allowed internal NTP traffic to pass through? ------------------------------ SWARUP GUPTA ------------------- ...

Hi, Configuration looks OK. To me, most probably it is because of how routers are connected in the background. ------------------------------ FARID AKHUNDOV ------------------------------

In a Junos configuration you can use the deactivate command to keep any section of the configuration present but disabled. https://www.juniper.net/documentation/us/en/software/junos/cli/topics/topic-map/modifying-configuration.html#id-deactivating-and-reactivating-statements-and-identifiers-in-a-junos-os-configuration ...

Hi all, Is it possible to configure port that is either esi-lag or standalone, but it is untagged/access? Not tagged. I was thinking about using apply-config-groups for interface, but it is not working. Below are two approaches. Neither worked, it ...