Routing

 View Only
last person joined: 4 days ago 

Ask questions and share experiences about ACX Series, CTP Series, MX Series, PTX Series, SSR Series, JRR Series, and all things routing, including portfolios and protocols.

If you have a question or a use case, likely there are others who are experiencing or worked through the same thing. Don't hesitate to jump in and ask or share your knowledge! Post here or in the vMX community. 

Need additional guidance?  Check out these Juniper Resources.

Technical Bulletins Knowledge BaseDay One+

Latest Discussion Posts

  • If you already did OIR, in that case better to check with JTAC for RMA. Elvin ------------------------------ [Phone] ------------------------------

  • The details will depend on how the spine is constructed. If the gateway is on the MX and the spine is straight layer 2 connection that it is simply the vlan connection on the spine link coming up to the layer 3 gateway interface on the MX being assigned ...

  • As these are all on the same Spine, how do we ensure the correct systems are routing back to the correct ISP? ------------------------------ SETH STANFILL ------------------------------

  • I need a support on my srx5800 model FW, Initially I have an alarm in my redundancy firewall on secondary node 1, with an FPC 8 Major alarm. We did JOJI on the card as to see if the alarm will clear, the alarm did clear after the Jack out Jack ...

  • From your description it looks like your simplest solution would allow the existing setup to stay as is. For this you would create a virtual router routing instance. This creates an isolated router and routing table. Here you would land the new ISP ...

  • Thanks for the help on this. We have everything working, but now we are looking to add in a second ISP with a different IP range and size. We have our default next hop setup with the original ISP. We are using 1 service set for all our rules with dnat-44 ...

  • For the ping to work in both directions you need to complete the route checks on both sides. You are sending the prefix xx.xx.xx.0/18 Can you confirm with the ISP1_peer_ip route mirror that your prefix xx.xx.xx.0/18 is accepted and installed. ...

Announcements

  • Join the Innovators Circle

    If you’re a Juniper customer/partner, you’re eligible to be a part of the Innovators Circle (IC).  Hundreds of IC members have participated in research studies conducted by Juniper’s decision-makers. Their feedback has made key business impacts in product development, branding, engineering, technical documentation, and more. 

    But don’t just take it from me, hear straight from your peers about their IC experience.

Unanswered Posts

Top Contributors in the Community