Routing

 View Only
last person joined: 20 hours ago 

Ask questions and share experiences about ACX Series, CTP Series, MX Series, PTX Series, SSR Series, JRR Series, and all things routing, including portfolios and protocols.

If you have a question or a use case, likely there are others who are experiencing or worked through the same thing. Don't hesitate to jump in and ask or share your knowledge! Post here or in the vMX community. 

Need additional guidance?  Check out these Juniper Resources.

Documentation Technical Bulletins Knowledge Base Day One Books

Latest Discussion Posts

  • Profile Picture

    10G RFC Testing

    This message was posted by a user wishing to remain anonymous Hello, Has anyone had any success on 10G RFC testing with the Juniper ACX2200 to an ACX710/7100 or MX240/480. Thank you.

  • I think what's happening is: The router's source of the active route is BGP, since it learns it via BGP with a preference of 200. You may also be learning via OSPF, but it won't be active. The import policy won't match the inactive, OSPF-learnt route ...

  • Yes, the customer used /24 subnets when he set up his network and we will fix it. Unfortunately we were not present at the initial setup and we had to deal with much bigger problems before the IP configuration. First of all I tested TCP port 179 and ...

  • Yes, the customer used /24 subnets when he set up his network and we will fix it. Unfortunately we were not present at the initial setup and we had to deal with much bigger problems before the IP configuration. First of all I tested TCP port 179 and ...

  • Profile Picture

    RE: BGP Cease Error

    Understandable, though a little surprising that a /24 would be used for an EBGP peering, typically these are formed on point to point linknets and these would be ridiculously large subnets to put on a point to point cable. Are these direct point to point ...

  • I cannot take ss or photo from my customer because of our agreement. But there are no any additional commands on the interfaces. Subnets and IP's private subnets. They have p2p fiber cable between sites so we use fully private environment. ------------------------------ ...

  • Hi; Thank you for your reply btw. You are right about setup. Subnets are /24 so there is no ip issue I think. Also those are all the config no FF, no MTU but ı got the error. ------------------------------ Can Karani Soner --------------- ...

Announcements

  • AI-Driven Support via JSI

    Get AI-driven support by connecting your devices to Juniper Support Insights (JSI). Join one of our upcoming “Jumpstart JSI Ask the Experts” meetups to learn more about JSI and ask the panel of experts your questions. Select the session that best suits your schedule:

    Tuesday, June 25 from 8:00-8:45PM PT: Register Now
    Wednesday, June 26 from 8:00-8:45AM PT: Register Now

Unanswered Posts

Top Contributors in the Community