View Only
last person joined: yesterday 

Ask questions and share experiences about ACX Series, CTP Series, MX Series, PTX Series, SSR Series, JRR Series, and all things routing, including portfolios and protocols.

If you have a question or a use case, likely there are others who are experiencing or worked through the same thing. Don't hesitate to jump in and ask or share your knowledge! Post here or in the vMX community. 

Need additional guidance?  Check out these Juniper Resources.

Technical Bulletins Knowledge BaseDay One+

Latest Discussion Posts

  • Thank you for your time replying to me. Yes..... It could be MTU problem. I have a suggestion from someone to delete interfaces pp0 unit 0 family inet mtu 1492 set interfaces pp0 unit 0 pppoe-options ppp-max-payload 1500 I can't confirm that ...

  • Looking at the symptoms I am almost entirely certain this is an MTU issue. I see it uses PPPoE and that reinforces this suspicion, because that is essentially a sort of tunneling technology, meaning there is a PPP encapsulation of your packets and you ...

  • Hello everyone, everything good ? I would like to know if it is possible to close a site-to-site VPN between a Unifi Dream Machine and a Juniper srx 345. Remembering that at the Unifi Dream Machine location I do not have internet with a fixed IP, the ...

  • BT FTTP broadband (UK) with SRX - mistic. Hello, I recently changed home broadband to BT which they call "full-fibre" FTTP. I used SRX as an ISP router with the previous provider with the VDSL2-A interfaces, Now simply I have to plug in the ethernet ...

  • Hi all, on Juniper MX10003 with Junos: 21.4R3-S2.3, I have a 100G juniper original optic that receive an alarm due to connectivity issue (fiber issue). It started to fill the logs with the alarms set and cleared: Sep 28 23:36:56.954 ...

  • Profile Picture

    RE: FBF questions

    found out it is caused by the older image. version 18.4 works.

  • Profile Picture

    RE: FBF questions

    Today my co-worker showed me the working configuration which has the same line (## reference 'NAT-PBR' not found). So seems it is not the cause for my issue. Just no clue why not use the ip specified via next-ip.


Unanswered Posts

Top Contributors in the Community