Routing

Hi, I can't see your entire configuration, but it seems you're missing IPV6 NDRA configuration from dynamic profile. set dynamic-profiles DP_PPPoE_L2_IPv6 protocols router-advertisement interface "$junos-interface-name" prefix $junos-ipv6-ndra-prefix ...

Hello, please could someone help me understand why following scenarios has a problem with routing thru lt-0/0/0? In case of A, packets(icmp) from HOST1 to HOST2 arrive to MX (verified by mirroring on sw1) and it's all, routing doesn't working. ...

as-path prend on export policy -> does something for incoming traffic. Nothing to do with outgoing traffic (your traceroute). Have a look at your import policies and set local-pref. ------------------------------ Olivier Benghozi ---------------- ...

This message was posted by a user wishing to remain anonymous Hello, I try to make dual stack IPv4/IPv6 on subscribers. We are using MX240 as BNG. IP are given to subscriber by radius (no dhcp on BNG) IPv4 is working well for now, But IPv6 ...

Hi Guys , Hope you guys are doing well , so my problem is i am trying to do a route manipulation in a customer network, So i have 3 ISPs . ISP1- 10.10.10.1 , int-ge-0/0/0 ISP2-20.20.20.1, int-ge-0/0/1 ISP3-30.30.30.1, int - ge-0/0/2 LAN1 - 192.168.0.1/24 ...

Hello, I currently have an unusual configuration with a peering point, and I need to establish two BGP sessions because we have two ASNs. This connection is made through a physical link where we have been asked to use two VLANs, each with a ...

Hi all, Just to update from JTAC regarding my issue. After junos version 18.4 the feature can see each que on GR interface already disable. So no other way we can check traffic statistic entering the que on GR interface. Hopefully if someone here ...