Routing

No joy Farid!! I used IP for next hop as suggested but it did not work, ------------------------------ Be kind!! ------------------------------

Hi everyone, I am trying to understand juniper accept remote next hop feature when dealing with EBGP, looking for ipv4 example that can illustrate the issue when this knob is off, and issue resolution using this knob off. I searched and searched, ...

Hi Farid, Thanks for your response, here is my understanding: 1) As BGP routes are received, they are subject to import policy if configured, it happens before BGP process accepts the route and offers it to routing table for installation. We can ...

You are correct the designations from low to high indicate where dropped traffic should occur first at times of contention. This overview gives a good set of descriptions for the overall settings that get configured to apply CoS overall. https://www.juniper.net/documentation/us/en/software/junos/cos-security-devices/topics/task/cos-device-configuration-overview-security.html ...

Hi, I am working on CoS and I do not understand well what does loss-priority do exactly? What is the relation between increasement from low priority towards high priority and packet loss desired? For example if I set high for the classifier does ...

Please advise on Junos version and BGP configuration for that peer. Have you tried capturing the egress BGP on the SRX with monitor traffic | Junos OS | Juniper Networks to ensure it's not corruption on the wire or by the receiver?

Thanks Farid, I will give a try with IP, I followed the instruction below that says next-hop has to be interface . I will let you know. https://www.juniper.net/documentation/us/en/software/junos/cos/topics/concept/cos-configuring-cos-based-forwarding.html ...