SRX

 View Only
last person joined: 21 hours ago 

Ask questions and share experiences about the SRX Series, vSRX, and cSRX.

  • 1.  Range of Port - JUNIPER SRX300

    Posted 04-30-2020 10:49
      |   view attached

    Guys, sorry my english! I'm implementing a 3cx pabx but it requires me to put a range of ports (9000-10999) but the juniper does not have these functions. Not enabled, would someone help me? My juniper is the SRX300


    #Port


  • 2.  RE: Range of Port - JUNIPER SRX300
    Best Answer

    Posted 05-03-2020 07:27

    You will need to create a custom application that includes your desired port range either tcp or udp as needed before you can create the rule itself.

     

    You can follow the process of creating the custom objects (address and application) followed by the actual rule in this kb article.

     

    https://kb.juniper.net/InfoCenter/index?page=content&id=KB10140