SRX

Hi dear All I have some problem We Have Two Juniper SRX240   in cluster and Zabbix Monitoring System got this message that "Yellow Alarm on firewall Juniper" why it and how can i solve this problem Thanks in Advance

P.S Two Juniper runs the same JunOs

Hi ,

Share the show chassis alarms output

Regards,

rparthi

Dear Rparthi 

i have run show show chassis alarms nothing but then run  system alarms i got this message

razmik@baghdasaryan> show system alarms
node0:
--------------------------------------------------------------------------
2 alarms currently active
Alarm time               Class  Description
2014-01-10 18:57:03 AMT  Minor  Autorecovery information needs to be saved
2014-01-10 18:57:02 AMT  Minor  Rescue configuration is not set

node1:
--------------------------------------------------------------------------
2 alarms currently active
Alarm time               Class  Description
2014-01-10 18:58:01 AMT  Minor  Autorecovery information needs to be saved
2014-01-10 18:58:01 AMT  Minor  Rescue configuration is not set

Hi Razmik,

You are seeing the minor alarams becuase you did not have saved the rescue configuration.

A rescue configuration allows you to define a known working configuration or a configuration with a known state that you can roll back to at any time. This alleviates the necessity of having to remember the rollback number with the rollback command. You use the rescue configuration when you need to roll back to a known configuration or as a last resort if your router or switch configuration and the backup configuration files become damaged beyond repair.

To save the most recently committed configuration as the rescue configuration so that you can return to it at any time, issue the request system configuration rescue save command:

Hi  Razmik,

Please run the following command to save the current status of disk partitioning, configuration, and licenses for autorecovery

request system autorecovery state save

Sample Output
request system autorecovery state save

user@host> request system autorecovery state save
Saving config recovery information
      Saving license recovery information
      Saving bsdlabel recovery information

http://www.juniper.net/techpubs/en_US/junos12.1/topics/reference/command-summary/request-system-autorecovery-state.html

Regards,
rparthi

+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

[Please Mark My Solution Accepted if it Helped, Kudos are Appreciated Too] .....

Thanks Rparthi

It is work good :)))))

I like to end any initial deploy of a SRX or Junos upgrade with these three procedures.

Thanks spuluka

I have done Folowwing Commit and Srx did not give me warning about alarm