Not sure what is wrong with my configuration
I can't figure out why vlan.2(irb.2) on port ge-1/0/3.0 provide different IP range instead 192.168.2.1/24
Anyone please can point the correct direction
@srx-a> show chassis firmware
node0:
--------------------------------------------------------------------------
Part Type Version
FPC O/S Version 18.4R3-S4.2 by builder on 2020-06-25 16:43:08 UTC
FWDD O/S Version 18.4R3-S4.2 by builder on 2020-06-25 16:43:08 UTC
node1:
--------------------------------------------------------------------------
Part Type Version
FPC O/S Version 18.4R3-S4.2 by builder on 2020-06-25 16:43:08 UTC
FWDD O/S Version 18.4R3-S4.2 by builder on 2020-06-25 16:43:08 UTC
@srx-a> show vlans
Routing instance VLAN name Tag Interfaces
default-switch default 1
ge-0/0/3.0
reth0.0
default-switch vlan.2 2
ge-1/0/3.0
default-switch vlan.5 5
reth0.0
@srx-a# show security zones security-zone trust
address-book {
address LAN1-network 192.168.1.0/24;
address LAN2-network 192.168.2.0/24;
}
host-inbound-traffic {
system-services {
all;
}
protocols {
all;
}
}
interfaces {
irb.2 {
host-inbound-traffic {
system-services {
all;
}
protocols {
all;
}
}
}
irb.1;
irb.5;
}
rx-a# run show interfaces terse irb
Interface Admin Link Proto Local Remote
irb up up
irb.1 up down inet 192.168.1.1/24
irb.2 up down inet 192.168.2.1/24
irb.5 up down inet 192.168.5.1/24
@srx-a# show system services dhcp-local-server
group jdhcp-group {
interface fxp0.0;
interface irb.1;
interface irb.2;
interface irb.5;
interface reth0.0;
}
@srx-a# show interfaces
ge-0/0/3 {
description ADMIN-LOCAL-SRX-A;
unit 0 {
family ethernet-switching {
vlan {
members default;
}
}
}
}
ge-0/0/4 {
description WAN;
gigether-options {
redundant-parent reth1;
}
}
ge-0/0/5 {
description LAN;
gigether-options {
redundant-parent reth0;
}
}
ge-1/0/3 {
description ADMIN-LOCAL-SRX-B;
unit 0 {
family ethernet-switching {
vlan {
members vlan.2;
}
}
}
}
ge-1/0/4 {
description WAN;
gigether-options {
redundant-parent reth1;
}
}
ge-1/0/5 {
description LAN;
gigether-options {
redundant-parent reth0;
}
}
fab0 {
fabric-options {
member-interfaces {
ge-0/0/2;
}
}
}
fab1 {
fabric-options {
member-interfaces {
ge-1/0/2;
}
}
}
irb {
unit 1 {
family inet {
address 192.168.1.1/24;
}
}
unit 2 {
family inet {
address 192.168.2.1/24;
}
}
unit 5 {
family inet {
address 192.168.5.1/24;
}
}
}
reth0 {
description LAN;
redundant-ether-options {
redundancy-group 1;
}
unit 0 {
family ethernet-switching {
interface-mode trunk;
vlan {
members [ default vlan.5 ];
}
}
}
}
@srx-a# show access
address-assignment {
pool DHCPvlan1 {
family inet {
network 192.168.1.0/24;
range junosRange {
low 192.168.1.50;
high 192.168.1.254;
}
dhcp-attributes {
maximum-lease-time 3600;
router {
192.168.1.1;
}
}
}
}
pool DHCPvlan2 {
family inet {
network 192.168.2.0/24;
range junosRangeB {
low 192.168.2.50;
high 192.168.2.254;
}
dhcp-attributes {
maximum-lease-time 3600;
router {
192.168.2.1;
}
}
}
}
pool DHCP-CLIENT {
family inet {
network 192.168.5.0/24;
range RANGE-CLIENT {
low 192.168.5.50;
high 192.168.5.254;
}
dhcp-attributes {
maximum-lease-time 3600;
name-server {
8.8.8.8;
8.8.4.4;
}
router {
192.168.5.1;
}
}
}
}
pool junosDHCPPool-FXP0 {
family inet {
network 10.1.1.0/24;
range junosRange-FXP0 {
low 10.1.1.50;
high 10.1.1.254;
}
dhcp-attributes {
router {
10.1.1.1;
10.1.1.2;
}
propagate-settings fxp0.0;
}
}
}
}
PC with Linux OS
srx-a# run monitor traffic interface ge-0/0/3
verbose output suppressed, use <detail> or <extensive> for full protocol decode
Address resolution is ON. Use <no-resolve> to avoid any reverse lookup delay.
Address resolution timeout is 4s.
Listening on ge-0/0/3, capture size 96 bytes
22:50:11.468288 Out IP truncated-ip - 259 bytes missing! [|ip]
Reverse lookup for 0.0.0.0 failed (check DNS reachability).
Other reverse lookup failures will not be reported.
Use <no-resolve> to avoid reverse lookups on IP addresses.
22:50:11.474052 In IP 0.0.0.0.bootpc > 255.255.255.255.bootps: BOOTP/DHCP, Request [|bootp]
22:50:11.661977 Out IP truncated-ip - 259 bytes missing! [|ip]
22:50:13.266879 In arp who-has 192.168.1.1 tell 192.168.1.50
22:50:13.267047 Out arp reply 192.168.1.1 is-at 10:39:XX:XX:XX:XX
```
@srx-a# run show dhcp server binding
IP address Session Id Hardware address Expires State Interface
192.168.1.50 25 c8:5b:XX:XX:XX:XX 3571 BOUND irb.1
```
@srx-a# run monitor traffic interface ge-1/0/3
verbose output suppressed, use <detail> or <extensive> for full protocol decode
Address resolution is ON. Use <no-resolve> to avoid any reverse lookup delay.
Address resolution timeout is 4s.
Listening on ge-1/0/3, capture size 96 bytes
Reverse lookup for 0.0.0.0 failed (check DNS reachability).
Other reverse lookup failures will not be reported.
Use <no-resolve> to avoid reverse lookups on IP addresses.
22:50:54.745038 In IP 0.0.0.0.bootpc > 255.255.255.255.bootps: BOOTP/DHCP, Request [|bootp]
22:50:54.883732 Out IP truncated-ip - 259 bytes missing! [|ip]
22:50:54.905072 In IP 0.0.0.0.bootpc > 255.255.255.255.bootps: BOOTP/DHCP, Request [|bootp]
22:50:55.065738 Out IP truncated-ip - 259 bytes missing! [|ip]
22:50:55.275156 In arp who-has 192.168.1.1 tell 192.168.1.52
22:50:56.284870 In arp who-has 192.168.1.1 tell 192.168.1.52
22:50:57.304646 In arp who-has 192.168.1.1 tell 192.168.1.52
22:50:58.333897 In arp who-has 192.168.1.1 tell 192.168.1.52
22:50:59.353839 In arp who-has 192.168.1.1 tell 192.168.1.52
22:51:00.373496 In arp who-has 192.168.1.1 tell 192.168.1.52
22:51:01.039329 Out arp who-has 192.168.2.51 tell 192.168.2.1
22:51:01.403045 In arp who-has 192.168.1.1 tell 192.168.1.52
22:51:01.938851 Out arp who-has 192.168.2.51 tell 192.168.2.1
22:51:02.422659 In arp who-has 192.168.1.1 tell 192.168.1.52
22:51:02.738574 Out arp who-has 192.168.2.51 tell 192.168.2.1
22:51:03.438055 Out arp who-has 192.168.2.51 tell 192.168.2.1
22:51:03.452054 In arp who-has 192.168.1.1 tell 192.168.1.52
22:51:04.038283 Out arp who-has 192.168.2.51 tell 192.168.2.1
22:51:04.471963 In arp who-has 192.168.1.1 tell 192.168.1.52
22:51:04.937928 Out arp who-has 192.168.2.51 tell 192.168.2.1
22:51:05.491711 In arp who-has 192.168.1.1 tell 192.168.1.52
22:51:06.521285 In arp who-has 192.168.1.1 tell 192.168.1.52
22:51:07.540812 In arp who-has 192.168.1.1 tell 192.168.1.52
22:51:08.570413 In arp who-has 192.168.1.1 tell 192.168.1.52
22:51:09.600210 In arp who-has 192.168.1.1 tell 192.168.1.52
22:51:10.619834 In arp who-has 192.168.1.1 tell 192.168.1.52
22:51:11.639451 In arp who-has 192.168.1.1 tell 192.168.1.52
@srx-a# run show dhcp server binding
IP address Session Id Hardware address Expires State Interface
192.168.1.50 25 c8:5b:XX:XX:XX:XX 3499 BOUND irb.1
192.168.1.52 26 c8:5b:XX:XX:XX:XX 3543 BOUND irb.2 <<<<<<<<<< WRONG IP
@srx-a#clear arp
@srx-a#clear dhcp server binding all
Same PC with windows OS
@srx-a# run monitor traffic interface ge-0/0/3
verbose output suppressed, use <detail> or <extensive> for full protocol decode
Address resolution is ON. Use <no-resolve> to avoid any reverse lookup delay.
Address resolution timeout is 4s.
Listening on ge-0/0/3, capture size 96 bytes
22:56:04.123928 In
Reverse lookup for 169.254.159.139 failed (check DNS reachability).
Other reverse lookup failures will not be reported.
Use <no-resolve> to avoid reverse lookups on IP addresses.
22:56:04.329569 In arp who-has 169.254.159.139 tell 169.254.159.139
22:56:07.142360 In IP 0.0.0.0.bootpc > 255.255.255.255.bootps: BOOTP/DHCP, Request [|bootp]
22:56:07.307931 Out IP truncated-ip - 269 bytes missing! [|ip]
22:56:07.310846 In IP 0.0.0.0.bootpc > 255.255.255.255.bootps: BOOTP/DHCP, Request [|bootp]
22:56:07.516481 Out IP truncated-ip - 269 bytes missing! [|ip]
22:56:07.551700 In arp who-has 192.168.5.1 tell 192.168.5.51
22:56:07.841640 In arp who-has 192.168.5.51 tell 0.0.0.0
22:56:07.949364 In arp who-has 192.168.5.1 tell 192.168.5.51
22:56:08.334157 In arp who-has 192.168.5.1 tell 192.168.5.51
22:56:08.828511 In arp who-has 192.168.5.51 tell 0.0.0.0
22:56:09.328991 In arp who-has 192.168.5.1 tell 192.168.5.51
22:56:09.835790 In arp who-has 192.168.5.51 tell 0.0.0.0
22:56:10.589068 In arp who-has 192.168.5.1 tell 192.168.5.51
22:56:10.835527 In arp who-has 192.168.5.51 tell 192.168.5.51
22:56:11.338584 In arp who-has 192.168.5.1 tell 192.168.5.51
22:56:11.833592 In arp who-has 192.168.5.1 tell 192.168.5.51
22:56:12.330011 In arp who-has 192.168.5.1 tell 192.168.5.51
22:56:13.338314 In arp who-has 192.168.5.1 tell 192.168.5.51
22:56:13.400804 In arp who-has 192.168.5.1 tell 192.168.5.51
22:56:14.338277 In arp who-has 192.168.5.1 tell 192.168.5.51
@srx-a# run show dhcp server binding
IP address Session Id Hardware address Expires State Interface
192.168.5.51 27 c8:5b:XX:XX:XX:XX 3479 BOUND irb.1 <<<<<<<<<<<<<< WRONG IP
#DHCP#irb#srx300#cluster