Skip to main content (Press Enter).
Skip auxiliary navigation (Press Enter).
Terms and Conditions
Skip main navigation (Press Enter).
Ideas & Innovation
Rise with Us
Become A Member
Back to Library
RE: SRX - Split Tunnel - Using Juniper Secure Connect
Uploaded - 12-03-2021
Please accept the terms of the copyright associated with this attachment before downloading it. Click the link below to read the terms.
The traffic selector was the problem. I neded to add two traddic selector rules, one for the 172.18.0.0/22 network aone one for the 10.243.263.0/24 network, both w a remote ip of 0.0.0.0/0 so the users could access both internal letworks and the internet. Thank you!
One way I can think of is to use the traffic-selector configuration. Say you want the users to access 192.168.1.0/24 in your network, then you put this in the local source list. Then users can go to 184.108.40.206 or any other places (as long as not 192.168.1.0/24) directly from their devices. You can have multiple traffic-selectors to cover more local resources. Haven't tried it in the lab, though. Check out the user devices "route print" to see where the traffic goes.
Related Entries and Links
No Related Resource entered.
Copyright � 2020 Answers | Elevate Community | Juniper Networks. All rights reserved.
Powered by Higher Logic