SRX

IMPORTANT MODERATION NOTICE

This community is currently under full moderation, meaning  all posts will be reviewed before appearing in the community. Please expect a brief delay—there is no need to post multiple times. If your post is rejected, you'll receive an email outlining the reason(s). We've implemented full moderation to control spam. Thank you for your patience and participation.



Expand all | Collapse all

eventd process is 100%

  • 1.  eventd process is 100%

    Posted 27 days ago
    I have observed that eventd process is reaching 100 % and due to this control plane load is 100%.

    I tried disabling tracing option but didnt help.
    Then I restarted the eventd process but no luck.

    Any suggestion what is causing eventd process to be highly utilised

    show system processes extensive
    last pid: 1612; load averages: 1.47, 1.34, 1.14 up 5+04:24:44 23:32:18
    334 processes: 3 running, 273 sleeping, 58 waiting

    Mem: 71M Active, 1168M Inact, 326M Wired, 129M Buf, 290M Free
    Swap: 1639M Total, 120K Used, 1638M Free


    PID USERNAME PRI NICE SIZE RES STATE TIME WCPU COMMAND
    1414 root 102 0 726M 14080K RUN 4:39 100.00% eventd
    9379 root 20 0 724M 14020K select 4:00 0.68% rtlogd
    12 root -60 - 0K 928K WAIT 53:38 0.39% intr{swi4: clock (0)}
    12 root -72 - 0K 928K WAIT 18:49 0.20% intr{swi1: netisr 0}
    9262 root 20 0 761M 32876K select 9:29 0.10% mib2d
    11 root 155 ki31 0K 16K RUN 116.7H 0.00% idle
    9381 root 20 0 714M 4740K select 59:44 0.00% sysctlrelayd
    9267 root 20 0 745M 22320K select 15:05 0.00% pfed
    2 root -16 - 0K 16K jfe_jo 13:54 0.00% jfe_job_0_0
    9354 root 20 0 735M 15664K select 13:51 0.00% license-check
    9265 root 20 0 921M 34248K select 13:18 0.00% l2ald
    9353 root 20 0 725M 7928K select 12:13 0.00% repd{repd}
    9302 root 20 0 776M 5592K select 6:32 0.00% shm-rtsdbd
    15 root -16 - 0K 16K - 5:02 0.00% rand_harvestq
    9356 nobody 20 0 69768K 3780K select 4:13 0.00% na-mqttd
    9258 root 20 0 731M 16900K select 4:13 0.00% snmpd
    9231 root 20 0 5948K 1440K select 3:29 0.00% bslockd
    9237 root 20 0 800M 38572K select 3:03 0.00% chassisd
    9263 root 20 0 827M 73264K kqread 2:58 0.00% rpd{rpd}
    9304 root 20 0 837M 5456K nanslp 2:50 0.00% gstatd
    12 root -92 - 0K 928K WAIT 2:25 0.00% intr{irq259: virtio_pci1}

    ---------------------------


    Thanks,
    Rahul Kharade


    ------------------------------
    rahul kharade
    ------------------------------


  • 2.  RE: eventd process is 100%

    Posted 27 days ago
    Issue resolved after changing the logging mode from event to stream

    ------------------------------
    rahul kharade
    ------------------------------