SRX

Expand all | Collapse all

SRX1500 Control port query

Jump to Best Answer
  • 1.  SRX1500 Control port query

    Posted 07-25-2019 13:01
    I am looking at buying two SRX1500 to place into a cluster and am investigating the modules/cables needed.
    Can anyone advise if there is any performance drops/gains on usingf a Copper SFP as opposed to a fibre SFP to link both of the dedicated control ports to form the cluster? Does anyone also have the module part numbers so I can do a Google for it?
    Thanks in advance.


  • 2.  RE: SRX1500 Control port query
    Best Answer

    Posted 07-25-2019 13:23

    Hi stuman,

     

    I dont think there is an option for a copper SFP for this port. Based on the hardware guide:

     

    ======================================================================================

    Note that the HA control port supports only the following transceivers:

     

    • EX-SFP-1GE-LH

    • EX-SFP-1GE-LX

    • EX-SFP-1GE-SX

    • EX-SFP-1GE-SX-ET

    • QFX-SFP-1GE-LX

    • QFX-SFP-1GE-SX

    • SRX-SFP-1GE-LH

    • SRX-SFP-1GE-LX

    • SRX-SFP-1GE-LX-ET

    • SRX-SFP-1GE-SX

    • SRX-SFP-1GE-SX-ET

    Ref: https://www.juniper.net/documentation/en_US/release-independent/junos/topics/topic-map/srx1500-chassis.html

    ======================================================================================

     

    None of the above are copper SFPs and those are the part number of the supported ones.

     

    Hope this helps.

     



  • 3.  RE: SRX1500 Control port query

    Posted 07-25-2019 13:52
    Thanks for the info I must of missed that bit when I read the hardware guide.