SRX

 View Only

IMPORTANT MODERATION NOTICE

This community is currently under full moderation, meaning  all posts will be reviewed before appearing in the community. Please expect a brief delay—there is no need to post multiple times. If your post is rejected, you'll receive an email outlining the reason(s). We've implemented full moderation to control spam. Thank you for your patience and participation.



  • 1.  SRX220H2 upgrading fails

    Posted 03-21-2018 03:18

    Hi there,

     

    I'm trying to upgrade my SRX220H2 to lattes firmware version:

     

    12.3X48-D65

     

    Actually I have:

     

    --- JUNOS 12.1X46-D72.2 built 2017-12-23 09:11:03 UTC

     

    During the progress of the processing I've got that the:

     

    platform srx220h for 12.1X47 and higher is not supported.

     

     

    I've the same hardware and chassis cluster in the other localization:

     

    There I've upgraded cluster successfully but in two steps:

     

    1. upgrade to 12.1x46-d65.4

     

    1. then upgrade to 12.3x48-d65.1.

     

     

    Why it's not working for upgrade from 12.1X46-D72.2 ?

     

    log:

    /var/tmp/incoming-package.5246                        1103 kB 1103 kBps
    Package contains junos-12.3X48-D65.1.tgz ; renaming ...
    NOTICE: Validating configuration against junos-12.3X48-D65.1.tgz.
    NOTICE: Use the 'no-validate' option to skip this if desired.
    Formatting alternate root (/dev/ad0s2a)...
    /dev/ad0s2a: 299.7MB (613852 sectors) block size 16384, fragment size 2048
        using 4 cylinder groups of 74.94MB, 4796 blks, 9600 inodes.
    super-block backups (for fsck -b #) at:
     32, 153504, 306976, 460448
    Extracting /var/tmp/junos-12.3X48-D65.1.tgz ...
    Checking compatibility with configuration
    Initializing...
    Verified manifest signed by PackageProductionEc_2017 method ECDSA
    veriexec: cannot bless /packages/junos-12.1X46-D72.2-domestic: Authentication error
    Verified junos-12.1X46-D72.2-domestic signed by PackageProductionEc_2017 method ECDSA
    Using junos-12.3X48-D65.1-domestic from /altroot/cf/packages/install-tmp/junos-12.3X48-D65.1-domestic
    Copying package ...
    ERROR: Unsupported platform srx220h for 12.1X47 and higher
    ERROR: validate-config: junos/+REQUIRE fails
    WARNING: Current configuration not compatible with /altroot/cf/packages/install-tmp/junos-12.3X48-D65.1-domestic

     

    version:

    >>>> show version      
    node0:
    --------------------------------------------------------------------------
    Hostname: gwoffice
    Model: srx220h
    JUNOS Software Release [12.1X46-D72.2]

    node1:
    --------------------------------------------------------------------------
    Hostname: gwoffice
    Model: srx220h
    JUNOS Software Release [12.1X46-D72.2]

     

     

    >>>>>> show chassis hardware
    node0:
    --------------------------------------------------------------------------
    Hardware inventory:
    Item             Version  Part number  Serial number     Description
    Chassis                                AQxxAAxxxx      SRX220H
    Routing Engine   REV 21   750-031175   AAFTxxxx          RE-SRX220H
    FPC 0                                                    FPC
      PIC 0                                                  8x GE Base PIC
    Power Supply 0  

    node1:
    --------------------------------------------------------------------------
    Hardware inventory:
    Item             Version  Part number  Serial number     Description
    Chassis                                AQxxxxAAxxxx      SRX220H
    Routing Engine   REV 21   750-031175   AADNxxxx          RE-SRX220H
    FPC 0                                                    FPC
      PIC 0                                                  8x GE Base PIC
    Power Supply 0  

     

    I'll be appreciate for help.


    #12.3x48
    #SRX220
    #upgrade


  • 2.  RE: SRX220H2 upgrading fails

     
    Posted 03-21-2018 07:44

    It may not upgrade from all, this is known bug tracked by via PR#987067

    https://prsearch.juniper.net/InfoCenter/index?page=prcontent&id=PR987067

     

    I would perhaps try with a no-validate knob (request system software add /var/tmp/image.tgz no-validate). though you should follow this tsb: https://kb.juniper.net/InfoCenter/index?page=content&id=tsb16646&actp=METADATA&act=login

     

     



  • 3.  RE: SRX220H2 upgrading fails

    Posted 03-21-2018 08:24

    Juniper had similar issue before.

    As a work around you can install 12.3X48-D10 first.

     

     

    Regards

     

    Please Mark My Solution Accepted if it Helped, Kudos are Appreciated too



  • 4.  RE: SRX220H2 upgrading fails
    Best Answer

    Posted 03-21-2018 18:13

    Hi,
    Forget about it. This is cluster of the srx220H instead of srx220H2.
    I've noticed it during comparison output :

     

    show chassis routing-engine

     

    Routing Engine status:
        Temperature                 49 degrees C / 120 degrees F
        Total memory              1024 MB Max   666 MB used ( 65 percent)
          Control plane memory     544 MB Max   419 MB used ( 77 percent)
          Data plane memory        480 MB Max   250 MB used ( 52 percent)
        CPU utilization:
          User                       7 percent
          Background                 0 percent
          Kernel                    15 percent
          Interrupt                  0 percent
          Idle                      78 percent
        Model                          RE-SRX220H
        Serial ID                      AAFTxxxx
        Start time                     2018-03-22 01:24:29 CET
        Uptime                         44 minutes, 13 seconds
        Last reboot reason             0x200:normal shutdown
        Load averages:                 1 minute   5 minute  15 minute
                                           0.20       0.42       0.69

     

    Total memory 1024 mb and symbol is 220h instead of 220h2 like on the second localization:

     

    Routing Engine status:
        Temperature                 52 degrees C / 125 degrees F
        Total memory              2048 MB Max   860 MB used ( 42 percent)
          Control plane memory    1072 MB Max   461 MB used ( 43 percent)
          Data plane memory        976 MB Max   400 MB used ( 41 percent)
        CPU utilization:
          User                      19 percent
          Background                 0 percent
          Kernel                    23 percent
          Interrupt                  2 percent
          Idle                      55 percent
        Model                          RE-SRX220H2
        Serial ID                      ACKDxxxx
        Start time                     2018-03-21 01:22:40 CET
        Uptime                         1 day, 47 minutes, 39 seconds
        Last reboot reason             0x200:normal shutdown
        Load averages:                 1 minute   5 minute  15 minute
                                           0.72       0.67       0.65